678d www.vishay.com vishay sprague revision: 04-jul-13 1 document number: 42055 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors 105 c, miniature, radial lead features ? improved smps output capacitors ? highest ripple current ratings per case size ? high cv ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 quick reference data description value nominal case size ? ? d x l in inches [mm] 0.394 x 0.472 [10.0 x 12.0] to 0.709 x 1.575 [18.0 x 40.0] operating temperature - 55 c to + 105 c rated capacitance range, c r 33 f to 6800 f tolerance on c r 20 % rated voltage range, u r 6.3 wv dc to 63 wv dc termination 2 and 3 radial leads and axial mount. life validation test at 105 c 4000 h ( ?? 0.512" [13.0] diameter): 3000 h (0.394" [10.0] diameter): ? cap ? 20 % (6.3 wv dc to 25 wv dc ), ? 15 % (40 wv dc to 63 wv dc ) from initial measurement. ? esr ? 1.3 x initial specified limit. ? dcl ? 2 x initial specified limit. shelf life at 105 c 1000 h: ? cap ? 20 % (6.3 wv dc to 25 wv dc ), ? 15 % (40 wv dc to 63 wv dc ) from initial measurements. ? esr ? 1.3 x initial specified limit. dc leakage current i = 0.01 cv, 2 min charge time. i = 0.03 cv, 1 min charge time. i in a, c in f, v in volts ripple current multipliers temperature ambient temperature multipliers + 105 c 1.0 + 85 c 2.2 + 75 c 2.7 ? + 65 c 3.0 frequency (hz) wv dc 50 to 60 100 to 120 300 to 400 1k to 19k 20k to 200k 6.3 to 63 0.60 0.70 0.75 0.82 1.0 low temperature performance capacitance ratio c - 55 c /c + 25 c minimum at 120 hz maximum ? capacitance ? change voltage multiplier 6.3 v to 16 v 0.75 25 v to 63 v 0.85 maximum ? impedance ? change voltage multiplier 6.3 v to 16 v 2.0 25 v to 63 v 1.5 esl (typical values at 1 mhz to 10 mhz) nominal diameter 0.394 [10.0] 0.512 [13.0] 0.630 [16.0] 0.709 [18.0] typical esl (nh) 4.0 7.0 10.0 12.0 available
678d www.vishay.com vishay sprague revision: 04-jul-13 2 document number: 42055 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bulk specifications in millimeters notes positive terminal negative terminal no charge potential (1) available for 12.5 mm, 16 mm , and 18 mm diameter units (2) available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal terminal code c s d 7.1 min. s leeve 9.5 min. w l + - terminal code j (1) s d l 25 min. 25 min. 25 min. + - nc s leeve w terminal code d 15 min. w 20 min. l s d + - s leeve terminal code o (2) s d 7.1 1.6 5.0 1.6 9.5 1.6 t w l + - third lead may fall within 20 of c l nc s leeve dimensions in inches [millimeters] case code nominal styles 2 and 4 styles 3 and 5 lead spacing lead diameter d l d (max.) l (max.) d (max.) l (max.) s 0.024 [0.60] t 0.020 [0.50] nominal awg cc 0.394 [10.0] 0.512 [13.0] 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.630 [16.0] 0.197 [5.0] n/a 0.025 [0.63] 22 cd 0.394 [10.0] 0.630 [16.0] 0.413 [10.5] 0.669 [17.0] 0.413 [10.5] 0.740 [18.8] 0.197 [5.0] n/a 0.025 [0.63] 22 cg 0.394 [10.0] 0.787 [20.0] 0.413 [10.5] 0.846 [21.5] 0.413 [10.5] 0.906 [23.0] 0.197 [5.0] n/a 0.025 [0.63] 22 dg 0.492 [12.5] 0.787 [20.0] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 0.906 [23.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 dk 0.492 [12.5] 0.984 [25.0] 0.512 [13.0] 1.043 [26.5] 0.512 [13.0] 1.142 [29.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 dm 0.492 [12.5] 1.043 [26.5] 0.512 [13.0] 1.102 [28.0] 0.512 [13.0] 1.161 [29.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 dt 0.492 [12.5] 1.319 [33.5] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 1.417 [36.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 ds 0.492 [12.5] 1.673 [42.5] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 1.791 [45.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 ek 0.630 [16.0] 0.984 [25.0] 0.650 [16.5] 1.031 [26.2] 0.650 [16.5] 1.098 [27.9] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 en 0.630 [16.0] 1.260 [32.0] 0.650 [16.5] 1.319 [33.5] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 er 0.630 [16.0] 1.417 [36.0] 0.650 [16.5] 1.476 [37.5] 0.650 [16.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 eu 0.630 [16.0] 1.575 [40.0] 0.650 [16.5] 1.642 [41.7] 0.650 [16.5] 1.669 [42.4] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 fr 0.709 [18.0] 1.417 [36.0] 0.728 [18.5] 1.476 [37.5] 0.728 [18.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 fv 0.709 [18.0] 1.575 [40.0] 0.728 [18.5] 1.653 [42.0] 0.728 [18.5] 1.693 [43.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 + - nc
678d www.vishay.com vishay sprague revision: 04-jul-13 3 document number: 42055 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape and reel, specifications to eia-468d in inches [millimeters] note (1) available as special order. dimensions in inches [millimeters] and packaging quantities case size f lead spacing std. qty/reel 0.236 x 0.453 [6.0 x 11.0] 0.197 [5.0] 800 0.315 x 0.472 [8.0 x 12.0] 0.197 [5.0] 700 p forme d lea d s k h f p 0 d d 0 w 0 w l 1 h 0 dimensions in inches [millimeters] and packaging quantities case size f lead spacing std. qty/reel 0.236 x 0.453 [6.0 x 11.0] 0.098 [2.5] 800 0.315 x 0.472 [8.0 x 12.0] 0.140 (1) [3.5] 700 0.394 x 0.512 [10.0 x 13.0] 0.197 [5.0] 500 0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 500 0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 500 p unforme d ( s traight) lea d s d 0 h f p 0 l 1 w 0 w d f
678d www.vishay.com vishay sprague revision: 04-jul-13 4 document number: 42055 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? terminal code i = tape and reel. terminal code + = tape and ammo. ? positive leader is standard. negative leader is available by special order. ordering example electrolytic capacitor 678d series: 678d 108 m 6r3 dg 3 d note ? for lead (pb)-free/rohs compliant prod ucts add suffix e 3 to part number. ? example: 678d108m6r3dg3de3 dimensions in inches [millimeters] item case size (diameter x length) 0.236 x 0.433 [6.0 x 11.0] 0.315 x 0.472 [8.0 x 12.0] 0.394 x 0.512 [10.0 x 13.0] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] d - lead-wire diameter 0.025 [0.63] 0.025 [0.6 3] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] p - pitch of component 0.500 [12.7] 0.500 [1 2.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] p 0 - feed hole pitch 0.500 [12.7] 0.500 [12. 7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] f - lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] k - clinch height 0.098 [2.5] 0.157 [4.0] n/a n/a n/a h - height of component from tape center 0.728 [18.5] 0.787 [20.0] 0.906 [23.0] 0.906 [23.0] 0.906 [23.0] h 0 - lead-wire clinch height 0.630 [16.0] 0.630 [16.0] n/a n/a n/a w - tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] w 0 - hold down tape width 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] d 0 - feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] t - total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] l 1 - maximum lead protrusion 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] description code explanation 678d product type 108 capacitance value (1000 f) m tolerance (m = 20 %) 6r3 voltage rating at 105 c (6r3 = 6.3 v) dg can size (see dimensions table) 3 sleeve and sealing (3 = p.v.c. sleeve w/epoxy end seal) d terminal code/packaging (d = bulk; straight leads) electrical data and ordering information capacitance (f) part number nominal case size d x l max. esr at + 25 c (m ? ) max. ripple at + 105 c (a) max. impedance at + 25 c (m ? ) 100 hz 20 hz 20 khz 20 khz to 100 khz 6.3 wv dc at 105 c, surge = 9 v 330.0 678d337m6r3cc3d 0.394 x 0.512 [10.0 x 13.0] 0.540 0.213 0.36 0.213 470.0 678d477m6r3cd3d 0.394 x 0.630 [10.0 x 16.0] 0.340 0.133 0.49 0.132 1000.0 678d108m6r3dg3d 0.492 x 0.787 [12.5 x 20.0] 0.200 0.071 0.83 0.070 2200.0 678d228m6r3ek3d 0.630 x 0.984 [16.0 x 25.0] 0.110 0.041 1.36 0.045 3300.0 678d338m6r3ds3d 0.492 x 1.673 [12.5 x 42.5] 0.067 0.031 1.67 0.032 4700.0 678d478m6r3fr3d 0.709 x 1.417 [18.0 x 36.0] 0.066 0.029 2.02 0.031 10 wv dc at 105 c, surge = 13 v 330.0 678d337m010cd3d 0.394 x 0.630 [10.0 x 16.0] 0.350 0.135 0.46 0.134 470.0 678d477m010cg3d 0.394 x 0.787 [10.0 x 20.0] 0.235 0.092 0.63 0.090 1000.0 678d108m010dm3d 0.492 x 1.043 [12.5 x 26.5] 0.120 0.062 0.98 0.061 2200.0 678d228m010ek3d 0.630 x 0.984 [16.0 x 25.0] 0.115 0.042 1.52 0.046 3300.0 678d338m010en3d 0.630 x 1.260 [16.0 x 32.0] 0.085 0.038 1.56 0.041 4700.0 678d487m010fr3d 0.709 x 1.417 [18.0 x 36.0] 0.070 0.031 1.97 0.033
678d www.vishay.com vishay sprague revision: 04-jul-13 5 document number: 42055 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 16 wv dc at 105 c, surge = 20 v 220.0 678d227m016cc3d 0.394 x 0.512 [10.0 x 13.0] 0.585 0.217 0.40 0.217 330.0 678d337m016cd3d 0.394 x 0.630 [10.0 x 16.0] 0.370 0.137 0.52 0.136 470.0 678d477m016cg3d 0.394 x 0.787 [10.0 x 20.0] 0.250 0.098 0.70 0.094 1000.0 678d108m016dm3d 0.492 x 1.043 [12.5 x 26.5] 0.130 0.066 1.00 0.065 2200.0 678d228m016er3d 0.630 x 1.417 [16.0 x 36.0] 0.074 0.032 1.78 0.034 3300.0 678d338m016fr3d 0.709 x 1.417 [18.0 x 36.0] 0.074 0.032 1.94 0.034 20 wv dc at 105 c, surge = 30 v 220.0 678d227m020cd3d 0.394 x 0.630 [10.0 x 16.0] 0.380 0.150 0.41 0.148 330.0 678d337m020cg3d 0.394 x 0.787 [10.0 x 20.0] 0.270 0.100 0.61 0.098 470.0 678d477m020dg3d 0.492 x 0.787 [12.5 x 20.0] 0.250 0.077 0.45 0.075 1000.0 678d108m020dt3d 0.492 x 1.280 [12.5 x 33.5] 0.115 0.048 0.78 0.045 2200.0 678d228m020er3d 0.630 x 1.417 [16.0 x 36.0] 0.077 0.032 1.80 0.034 3300.0 678d338m020fv3d 0.709 x 1.575 [18.0 x 40.0] 0.061 0.026 2.25 0.028 25 wv dc at 105 c, surge = 35 v 100.0 678d107m025cc3d 0.394 x 0.512 [10.0 x 13.0] 0.700 0.250 0.32 0.250 220.0 678d227m025cg3d 0.394 x 0.787 [10.0 x 20.0] 0.300 0.105 0.59 0.100 330.0 678d337m025dg3d 0.492 x 0.787 [12.5 x 20.0] 0.270 0.078 0.79 0.076 470.0 678d477m025dm3d 0.492 x 1.043 [12.5 x 26.5] 0.160 0.067 0.97 0.068 1000.0 678d108m025ds3d 0.492 x 1.673 [12.5 x 42.5] 0.090 0.034 1.60 0.036 2200.0 678d228m025fv3d 0.709 x 1.575 [18.0 x 40.0] 0.062 0.026 2.22 0.028 40 wv dc at 105 c, surge = 55 v 47.0 678d476m040cc3d 0.394 x 0.512 [10.0 x 13.0] 0.950 0.265 0.28 0.265 100.0 678d107m040cd3d 0.394 x 0.630 [10.0 x 16.0] 0.580 0.165 0.38 0.165 330.0 678d337m040dm3d 0.492 x 1.043 [12.5 x 26.5] 0.200 0.068 0.93 0.070 470.0 678d477m040ek3d 0.630 x 0.984 [16.0 x 25.0] 0.133 0.046 1.28 0.050 1000.0 678d108m040er3d 0.630 x 1.417 [16.0 x 36.0] 0.080 0.033 1.76 0.035 50 wv dc at 105 c, surge = 75 v 47.0 678d476m050cc3d 0.394 x 0.512 [10.0 x 13.0] 1.250 0.275 0.28 0.275 100.0 678d107m050cg3d 0.394 x 0.787 [10.0 x 20.0] 0.520 0.115 0.57 0.112 220.0 678d227m050dm3d 0.472 x 1.043 [12.5 x 26.5] 0.240 0.069 0.93 0.071 330.0 678d337m050ek3d 0.630 x 0.984 [16.0 x 25.0] 0.150 0.048 1.26 0.052 470.0 678d477m050ds3d 0.492 x 1.673 [12.5 x 42.5] 0.110 0.036 1.55 0.039 1000.0 678d108m050fv3d 0.709 x 1.575 [18.0 x 40.0] 0.077 0.028 2.15 0.032 63 wv dc at 105 c, surge = 80 v 33.0 678d336m063cc3d 0.394 x 0.512 [10.0 x 13.0] 1.600 0.288 0.27 0.288 47.0 678d476m063cd3d 0.394 x 0.630 [10.0 x 16.0] 1.000 0.180 0.37 0.180 100.0 678d107m063dg3d 0.492 x 0.787 [12.5 x 20.0] 0.450 0.093 0.72 0.090 220.0 678d227m063dt3d 0.492 x 1.280 [12.5 x 33.5] 0.160 0.055 1.10 0.054 220.0 678d227m063ek3d 0.630 x 0.984 [16.0 x 25.0] 0.170 0.050 1.23 0.054 330.0 678d337m063ds3d 0.492 x 1.673 [12.5 x 42.5] 0.130 0.038 1.51 0.040 470.0 678d477m063er3d 0.630 x 1.417 [16.0 x 36.0] 0.120 0.035 1.70 0.038 electrical data and ordering information capacitance (f) part number nominal case size d x l max. esr at + 25 c (m ? ) max. ripple at + 105 c (a) max. impedance at + 25 c (m ? ) 100 hz 20 hz 20 khz 20 khz to 100 khz
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
